Mentech introduces small form factor inductors - small size, high current, high saturation, low noise and high temperature resistance
1、Product Introduction ---Integrated Small Scale Inductors
Mentech's one-piece inductors are the result of the development of computer motherboard technology and power supply technology: CPU frequencies are getting higher and higher, so the need for stable power supply and filtering is very high. Our inductors are the perfect solution to this problem. It can work for a long time under high current operating conditions, providing a stable power supply for the CPU. Of course, the main function of an inductor is to filter, and in this respect, Mentech's one-piece moulded inductors are of excellent quality, with good material properties and a special design that allows for a more stable structure, lower impedance and higher efficiency.
With the development of 5G, electronic products are becoming "four", i.e. miniaturised, integrated, multi-functional and high-powered. In response to the popularity of electronic products, the electronics industry urgently needs an inductor that is small, high power, low cost and suitable for integrated installation. Obviously, traditional inductors such as plug-in inductors and wire-wound chip inductors do not fully meet the requirements, so a new type of inductor was created. Mentech's one-piece (small size) inductors were the result.
Mentech's MHA series of integrated power inductors cover the mainstream sizes 201208-252012 and the R22-4R7 series of inductors, which are particularly suitable for powering mobile portable terminals such as smartphones and headphones.
2、Product Features - One-piece small size inductor
（1）Low impedance by using low loss alloy powder die casting.
（2）Small volume, high current, able to maintain excellent temperature rise current and saturation current characteristics under high temperature.
（3）One-piece moulded structure, solid and strong, precise product, using thermal spray technology to make the product durable and rust-proof.
（4）Halogen free and RoHS compliant.
3、Scope of application ----One-piece small size inductors
Mentech's unibody (small form factor) inductors can be used in smartphones, rechargeables, virtual reality, augmented reality, portable gaming consoles, smart wear, WiFi modules, laptops, servers, networking/telecom equipment and more.
4、Process advantages--- One-piece small size inductors
Thermoformed inductors: Maintain low molding pressure, achieve high density, effectively increase magnetic permeability and reduce product size, allowing efficient use of PCB space, electroplated molded electrodes, and better reliability.
5、Flow of the process--- One-piece small size inductors
6、Specification of the model-- One-piece small size inductors
For more products, please visit （https://www.mnc-magnetic.com/.）网站
If you have any questions about our products, please send us a message or send your query to（邮箱）kelly-liu@mnc-tek.com.cn，tu.dai.jun@mnc-tek.com.cn Thank you!
With the development of 5G, electronic products began to show the "four modernization" development trend, that is, miniaturization, integration, multi-function, high-power. In order to adapt to the popularity of electronic products, the electronic industry urgently needs a small volume, high power, low cost and suitable for integrated installation of inductor products. It is obvious that traditional inductors such as plug-in inductors and wound chip inductors do not fully meet the requirements, so a new type of inductor emerges. Hence Mentech's all-in-one (small size) inductor.
Mentech integrated power inductor MHA series, products currently cover the mainstream size of 201208-252012 and R22-4R7 series sensing value, especially suitable for smart phones, headphones and other mobile portable terminal power supply.
Mentech Automotive network transformer: Has passed the AEC-Q200 certification, to meet the requirements of high-rate on-board Ethernet data transmission, Keysight Technology will be in the electronic test and measurement industry accumulated deep experience with the needs of the automotive industry, launched a full set of test program specifically for automotive Ethernet, After the acquisition of Ixia in 2017, this solution was further integrated, and the test solution of automobile Ethernet from Layer 1 physical Layer to Layer 7 protocol Layer was opened. The corresponding automobile Ethernet standard also came into being. Our automotive grade network transformers support a variety of automotive technologies, including CAN bus, FlexRay, Ethernet audio and video bridging (AVB), 100BASE-T1, 1000BASE-T1, Power Over Data Cable (PoDL), etc. The operating temperature range of the company's products is from -40℃ to +125℃, which is used for signal filtering, isolation, high reliability and meets the quality requirements of AEC-Q200 automobile.
Mentech invites you to meet at the India International ICT Expo.
Mentech signed a contract with Guangdong Communications Bureau to participate in the construction of Guangdong 2021 Industrial Internet Logo project. On July 5, Guangdong Province 2021 Industrial Internet Identity Resolution System Construction Guidance Fund Support Project signing meeting was successfully held in Guangdong Communications Administration Bureau. This contract will determine the "industrial Internet identity resolution secondary nodes (transportation infrastructure)" and other 19 project for guangdong province 2021 industrial Internet identity resolution system construction guide fund (secondary nodes) project, "workshop equipment and production line identification application service solution" and other 18 project for guangdong province 2021 industrial Internet analytical innovative applications into the logo The library project. Among them, the "identification resolution Secondary Node project for 5G communication industry" of Minpu was awarded as a project supported by Guangdong Provincial Industrial Internet Identification Resolution System Construction Guidance Fund, which marks Mentech's formal entry into the field of industrial Internet identification resolution secondary node construction.
Mentech invites you to the Applied Energy Electronics Show.
On June 25, after the end of the first China Outdoor Energy Storage Power Conference, Mentech (002902) released DN series of portable outdoor energy storage power in the press conference of "Minpu Group's 14th Anniversary Celebration and brand Strategy Upgrade", and officially entered the portable energy storage market.
The release of DN series of portable outdoor energy storage power also marks the beginning of Mentech's outdoor smart life, the official formation of the "To B+To C" dual brand strategy, and the strategic transformation around "digital" and "new energy" has entered a new chapter. It is worth mentioning that in terms of technology and products, no matter To B or To C, Mentech's products and business model do not leave "digital" and "new energy".
A picture to understand, outdoor power NEO 300: one hand can be carried, portable small, large use!
